The "standard" swerve drive bevel gear - now with black nitride coating for superior performance.
As time passes and experience grows within the FRC community, previously complicated build techniques are becoming more commonplace. Coaxial swerve drives, once attempted by only the most elite of teams, are now a well documented and accessible solution. Most coaxial swerve drives utilize a bevel gear pair as part of their design. After surveying FRC teams, we found almost everyone is using the same gear.
These 15-tooth 12 DP bevel gears will drop perfectly into a custom designed coaxial swerve module (swerve module NOT included), WCP SS Swerve,or will work great for designers looking to transfer torque through a right-angle gearbox.
|WCP-0232||15t Steel Bevel Gear (1.5 Module, 8mm Key Bore)||Steel||STEP||0.066 lbs|
|WCP-0233||45t Steel Bevel Gear (1.5 Module, 1" Round Bore)||Steel||STEP||0.323 lbs|
|217-3344||15t Steel Bevel Gear (12DP, 3/8" Hex Bore)||4140 Steel||STEP||0.118 lbs|
|217-5907||15t Steel Bevel Gear (12DP, 1/2" Hex Bore)||4140 Steel||STEP||0.120 lbs|
Gears require lubrication. We recommend white lithium grease or DuPont Teflon Non-Stick Dry-Film Lubricant
Diametral Pitch: 12DP
Steel Gears: Black Nitride